The full abrasives line.
Eight product families covering cutting, grinding, sanding, finishing and diamond work. Need power tools or safety gloves in the same shipment? We can add them.
Cut-off wheels
Thin and standard cut-off wheels for angle grinders and chop saws. Separate formulations for carbon steel and for stainless steel (iron- and sulphur-free), in single- and double-net reinforcement.
| Type | Common sizes | Typical use |
|---|---|---|
| Thin cutting, 4" | 100–107 × 0.9–1.2 × 16 mm | Stainless steel, thin sheet |
| Standard cutting, 4" | 100 × 2.5 × 16 mm | Carbon & stainless steel |
| Cutting, 4½"–9" | 115 / 125 / 150 / 180 / 230 × 1.2–3.0 × 22.23 mm | Carbon & stainless steel |
| Chop-saw wheels, 10"–16" | 250 / 300 / 350 / 400 × 2.5–3.2 × 25.4 / 32 mm | Bar, tube & profile cutting |
Sizes shown are our most common programs. Other diameters, grits and packing on request.
Grinding & bonded wheels
Depressed-centre (Type 27) grinding discs for weld removal and surface preparation, combination cut-and-grind discs, and vitrified, resin and diamond wheels for bench grinders and tool sharpening.
| Type | Common sizes | Typical use |
|---|---|---|
| Grinding disc, 4" | 100 × 4–6 × 16 mm | Carbon & stainless steel |
| Grinding disc, 4½"–9" | 115 / 125 / 150 / 180 / 230 × 6 × 22.23 mm | Weld removal, deburring |
| Cut & grind 2-in-1 | 100–230 × 2.5–6 × 16 / 22.23 mm | Stainless steel |
| Cup & bench wheels | 75–150 mm, grit 46–120 | Sharpening & finishing |
| Diamond / alloy wheels | 80–180 mm, custom on request | Carbide & hard materials |
Sizes shown are our most common programs. Other diameters, grits and packing on request.
Flap discs & flap wheels
Flat and conical flap discs on fibreglass or plastic backing, plus flower-type flap wheels, shaft-mounted flap wheels and abrasive cloth wheels for blending, deburring and satin finishing.
| Type | Common sizes | Typical use |
|---|---|---|
| Flat flap disc | 100 × 16 / 125 × 22 / 150 × 22 mm, grit 40–320 | Grinding & blending |
| Zirconia flap disc | 100 × 16 / 125 × 22 mm, grit 60–320 | Stainless & heavy stock removal |
| Flower flap wheel | 100 × 16 mm, grit 60–600 | Finishing & polishing |
| Shaft-mounted flap wheel | Ø 16–80 mm, grit 80–600 | Inside & contour finishing |
Sizes shown are our most common programs. Other diameters, grits and packing on request.
Coated abrasives
Silicon carbide and aluminium oxide sandpaper for wet and dry sanding, emery cloth, sanding belts and rolls cut to size, hook-and-loop discs, fibre discs and sanding sponges.
| Type | Common sizes | Typical use |
|---|---|---|
| Waterproof sandpaper | 230 × 280 mm, grit 60–2000 (fine up to 7000) | Wet / dry sanding |
| Emery cloth | 230 × 280 mm, grit 36–240 | Metal finishing |
| Belts & rolls | Any width & length on request | Grinding, polishing, brushing |
| Fibre & hook-and-loop discs | 4" / 5" / 6" / 7" | Sanding & polishing |
| Sanding sponge | 100 × 70 × 25 mm, grit 60–2500 | Contours, paint prep |
Sizes shown are our most common programs. Other diameters, grits and packing on request.
Non-woven & polishing
Non-woven nylon wheels and pads for satin and brushed finishes, cotton, sisal and felt buffing wheels, wool pads and a full range of polishing compounds for stainless steel, brass and aluminium.
| Type | Common sizes | Typical use |
|---|---|---|
| Nylon fibre wheel | Ø 100–300 mm, grit 60–600 | Brushed & satin finishing |
| Non-woven pad / roll | Pads, rolls, wheels; custom sizes | Cleaning & surface prep |
| Cotton / sisal / felt buffs | 4"–16" | Pre-polish & mirror finish |
| Polishing compounds | Coarse to mirror grades | Stainless, brass, aluminium |
Sizes shown are our most common programs. Other diameters, grits and packing on request.
Wire wheels & brushes
Flat and cup wire wheels for angle grinders and bench grinders, shaft-mounted end brushes, hand brushes and tube brushes for rust removal, weld cleaning and surface preparation.
| Type | Common sizes | Typical use |
|---|---|---|
| Flat wire wheel | 100–300 mm | Rust removal, polishing |
| Cup wire brush | 125 / 150 / 180 mm × M14 or 16 / 22 mm | Weld & scale removal |
| Shaft-mounted brush | Ø 32–100 mm | Inside & pipe cleaning |
| Hand & tube brushes | Various | Cleaning & deburring |
Sizes shown are our most common programs. Other diameters, grits and packing on request.
Saw blades & diamond tools
Carbide-tipped circular blades for wood and aluminium, HSS cold-saw blades for steel and stainless, and diamond blades, cup wheels and core tools for tile, stone, glass and concrete.
| Type | Common sizes | Typical use |
|---|---|---|
| TCT circular blade | 110–355 mm, 40–120 teeth | Wood & aluminium |
| HSS cold-saw blade | 250–400 × 1.2–2.5 × 32 mm | Carbon & stainless steel |
| Diamond blade (tile / stone) | 105–350 mm | Porcelain, granite, marble |
| Diamond cup wheel | 100–180 mm | Concrete & stone grinding |
| Road-cutting blade | 300–500 mm | Asphalt & concrete |
Sizes shown are our most common programs. Other diameters, grits and packing on request.
Mounted points & burrs
Vitrified, rubber and non-woven mounted points, tungsten carbide burrs, diamond points and wool points on 3 mm and 6 mm shanks for mould work, deburring and detailed finishing.
| Type | Common sizes | Typical use |
|---|---|---|
| Vitrified / rubber points | Ø 3–25 mm | Grinding & polishing |
| Tungsten carbide burrs | Ø 3–16 mm, sets available | Deburring, mould work |
| Non-woven / wool points | Ø 3–100 mm | Polishing & finishing |
| Diamond points | Ø 3–20 mm | Glass, stone, hard materials |
Sizes shown are our most common programs. Other diameters, grits and packing on request.
Need a size that is not listed?
Send your product list, sizes and target quantities. We reply with one consolidated quotation for the whole list.